Aerial Bunched Cables




We are one of the promising Aerial Bunched Cables Manufacturers. The Aerial Bunched Cables (ABC) that we deal in are required for electrical transmission system or a telecommunication line, which is suspended between utility poles or electricity pylons. Aerial Bunched Cables provide safety and reliability compared to other cables. We provide only the best and thus have created repute amid the prominent Aerial Bunched Cables Suppliers in India.

 

1100 volt Grade Cables are mostly used for distributing power to individual consumers by utility service providers like electricity Bords, electricity distributing authorities. 10000 volts Grade Cables are also use, for the supply of farms, waterworks, transmitters and other facilities outside urban areas. A further common use is the replacement of overhead telecommunication lines, for example, along railway line, by aerial cables as they can be installed on existing poles and make the facility more reliable.

 

Aerial Cable is more valuable for long term economy, safety and reliability overhead conductor. It is better choice for power distribution in densely populated areas where laying the underground cable is either difficult or extremely expensive.

 

Advantages :-

  • Easly Installation in uraban,congested, or forest area.
  • Saving in cost .
  • Human Safety in case of accidental contacts.
  • Water proof System.
  • Multiple circuits of Power and Telephone cables could be strung in the same set of poles.

Conductor

Phase of lighting conductor : Hard drawn Aluminium H2 or H4 grade as per IS : 8130. Messsenger Conductor : Aluminum Silica & Magnesium Alloy used as per IS:398

 

Insulation

Relemac Technologies Aerial Bunched Cables are mainly available in XLPE applied by extrusion process.

 

Color Insulation

Relemac Technologies Aerial Bunched Cables are mainly available in carban black. Because the cable remains exposed to sunlight and environment.

 

FR Insulation

FR PVC insulation has better fire retardant properties than normal PVC. This FR PVC compound has a high oxygen and temperature index. The wires are wadded with a flame retardant (FR) PVC compound, which helps to control the spread of fire even at very high temperature. It also protects against electrical shock and short circuit.

 

Construction

  • 3 Aluminium conductor, insulated with XLPE Insulation.
  • 1 Aluminium conductor with XLPE Insulation (optional).
  • One messenger Al-Alloy Conductor(Base or Insulated).


1100 Volt Grade Aluminium Conductor & Messanger Conductor With Aluminium Alloy.

Description of Cable Size   No.of Wires   Thickness of XLPE Insulation Minimum Breaking Load of Messenger Maximum D.C Resistance Ohm/km
Phase Street Light
Nom./Min.mm Nom./Min.mm kN Phase Street light Messenger
  Bare messenger Conductor
3Cx16mm2+16mm2+25mm2 7 1.20/0.98 1.20/.98 7 1.91 1.91 1.38
3Cx25mm2+16mm2+25mm2 7 1.20/0.98 1.20/.98 7 1.2 1.91 1.38
3Cx35mm2+16mm2+25mm2 7 1.20/0.98 1.20/.98 7 0.868 1.91 1.38
3Cx50mm2+16mm2+35mm2 7 1.50/1.25 1.20/.98 9.8 0.641 1.91 0.986
3Cx70mm2+16mm2+50mm2 7 1.50/1.25 1.20/.98 14 0.443 1.91 0.689
3Cx95mm2+16mm2+70mm2 7 1.50/1.25 1.20/.98 19.7 0.32 1.91 0.492

Notes: Cable of Higher Size i.e geater than 95 Sq.mm and  Insulated Messenger are also manufactured as per customer requiremets.